Power Off Process

1 - AC Switchgear

Using a battery light source in the garage, or with the garage door open for light, flip the 30 AMP AC out breaker off the AC switchgear. The cabin power will be off.

2 - Inverter and DC Switchgear

Press the "Inv Enable" button on the inverter to power off the inverter, assuming the inverter was enabled.

After powering off the inverter, flip the 250 amp breaker on the DC switchgear "Off".

3 - Battery BMS

Check the batter State of Charge (SOC). Ideally the battery will have more than 40% SOC before being placed in standby mode. If not, please plan a charge session in advance of powering off the system. Press and hold the silver button on the front of the battery for approximately 10 seconds, until the status light turns off.

4 - Battery Breaker

Open the panel on the top of the battery. Use care not to drop the cover in the case. Flip the large green breaker switch to "Off". Carefully place the cover back in place.

5 - AC Switchgear

Flip the 30 AMP AC out breaker on the AC switchgear. The cabin now has power. At this point I generally proceed upstairs and set the clock on the range.

Bye Buddy!